Wi-fi Router / Electronic Device Radiation Shield Cover

A Wi-Fi router / modem is usually the highest source of radiation exposure in the home or office as Wi-Fi routers are on constantly and are designed to maximise output so that signal reaches all sections of your home or office. Ideally, internet connections are hardwired or Wi-Fi is turned off when not in use so that electromagnetic radiation exposure is stopped. When Wi-Fi needs to be in use however the Wi-Fi Device Radiation Shield Cover is the most effective solution for reducing exposure to as low as resonably achievable.

To minimise exposure simply slip the shielded cover over your Wi-Fi router / modem to dramatically and instantaneously reduce your Wi-fi radiation exposure. If this renders Wi-Fi inoperable in areas where you need it then the extent of the signal blocked by the shielded cover can be adjusted by unsealing the bag and leaving it slightly open, or opening the mouth of the bag up altogether and pointing it in the direction signal is most needed, or even slipping the bag half way off the modem. Do this in conjunction with an RF meter or an app like "Wi-Fi analyser" to observe the change in Wi-Fi strength / radiation signal at various locations throughout the home, office or classroom and to find the right balance between radiation mitigation and necessary signal strength.

The shielded cover is made from flexible, breathable RF shielding material and is generously proportioned to allow it to be used with modems of all shapes and sizes.

- Large size 45cm x 35cm bag with a velcro opening on one side of the bag for easy open and closing.
- Made from highly effective anti-radiation material and tested and proven by Mobile Safety.

Note this product comes in a clear plastic sleeve without packaging or further instructions.

Cleaning Instructions - Wipe the fabric with a damp cloth rather than wash this item as washing will affect its capability to shield radiation. If it's necessary to wash it please gently wash by hand only and do not rub the fabric as it will damage the shielding coating on the material. Do not iron or use a dryer.